AdvancedSearch

column
    Study of saturation magnetization and coercive force of Ti(CN) base cermets
    Zhou Shuzhu, Peng Weizhen, Wang Shequan, Wang Lingsen
    2006, 24(4): 244-247. DOI:10.3321/j.issn:1001-3784.2006.04.001
    Abstract PDF
    Maximum plastic work principle for PM sintered material
    Qin Xunpeng, Hua Lin
    2006, 24(4): 248-250,255. DOI:10.3321/j.issn:1001-3784.2006.04.002
    Abstract PDF
    Effects of starting powders size on the microstructures of TiCN-based cermets
    Han Chengliang, Liu Ning, Fan Guangneng, Gao Daming
    2006, 24(4): 251-255. DOI:10.3321/j.issn:1001-3784.2006.04.003
    Abstract PDF
    Study on internal oxidation product of Cu-0.6%Al alloy prepared by powder metallurgy
    Lu Yanjie, Kang Zhijun, Cui Shun, Lin Chenguang, Hui Zhilin, Li Ming, Zhou Zenglin
    2006, 24(4): 256-258. DOI:10.3321/j.issn:1001-3784.2006.04.004
    Abstract PDF
    Research on the mechanical properties of spark plasma sintering NdFeB sintered magnets
    Wang Gongping, Yue Ming, Zhang Jiuxing, Liu Weiqiang, Ren Ren, Liu Chengyang
    2006, 24(4): 259-262,266. DOI:10.3321/j.issn:1001-3784.2006.04.005
    Abstract PDF
    Bonded NdFeB magnets prepared by injection molding
    Chen Yike, Ye Jinwen
    2006, 24(4): 263-266. DOI:10.3321/j.issn:1001-3784.2006.04.006
    Abstract PDF
    Investigation on relative density of nanocrystalline Nd2Fe14B/α-Fe composite permanent magnetic material prepared by extrusion
    Wang ying, Yu yang, Wang Erde, Hu Lianxi
    2006, 24(4): 267-270. DOI:10.3321/j.issn:1001-3784.2006.04.007
    Abstract PDF
    Research on physical and mechanical properties of (Ti, Al)N monolayer and multilayer PVD coatings
    Chen Li, Wu Enxi, Yin Fei, Wang Xiuquan
    2006, 24(4): 271-274. DOI:10.3321/j.issn:1001-3784.2006.04.008
    Abstract PDF
    A novel water soluble binder for MIM
    Li Haipu, Zhong Hong, Zhu Ailan
    2006, 24(4): 275-279. DOI:10.3321/j.issn:1001-3784.2006.04.009
    Abstract PDF
    Study of structure and properties of ferrous sintered cam materials after laser surface quenched
    Li Yueying, Liu Yongbing, Chen Hua
    2006, 24(4): 280-282,286. DOI:10.3321/j.issn:1001-3784.2006.04.010
    Abstract PDF
    Influence of the annealing temperature on the magnetic properties of amorphous Fe74Al4Sn2P10C2B4Si4 powder core
    Lu Caowei, Lu Zhichao, Li Deren, Guo Feng, Wang Jun, Zhao Tongchun, Zhou Shaoxiong
    2006, 24(4): 283-286. DOI:10.3321/j.issn:1001-3784.2006.04.011
    Abstract PDF
    Effect of surface coating on inoxidizability of bronze powder
    Zhu Lixia, Zhao Maiqun, Jin Wenfeng
    2006, 24(4): 287-290. DOI:10.3321/j.issn:1001-3784.2006.04.012
    Abstract PDF
    Study on the technology of penetrating casting for aluminium foam
    2006, 24(4): 291-294. DOI:10.3321/j.issn:1001-3784.2006.04.013
    Abstract PDF
    Structure of forming die for preparing high strength PM bevel gears
    Jiang Yeqin, Zhang Zhiyong, Xie Weiren
    2006, 24(4): 295-298. DOI:10.3321/j.issn:1001-3784.2006.04.014
    Abstract PDF
    Review of formation of Ni3Al intermetallics compounds by mechanical alloying
    Meng Jie, Jia Chengchang, Wang Kaiming
    2006, 24(4): 299-303,309. DOI:10.3321/j.issn:1001-3784.2006.04.015
    Abstract PDF
    Property comparison of PM bronze bearings manufactured in Europe and North America
    , ,
    2006, 24(4): 304-309. DOI:10.3321/j.issn:1001-3784.2006.04.016
    Abstract PDF
    Combining electrostatic die wall lubrication and warm compaction to enhance green and sintered properties of PM components
    , , , , , ,
    2006, 24(4): 310-312. DOI:10.3321/j.issn:1001-3784.2006.04.017
    Abstract PDF
    Baidu
    map